Electricity takes a big place in your daily life. Almost every appliance you need around the house runs on electricity: from ovens to refrigerators and freezers to lighting. However, a few simple rules can effectively reduce electricity costs. Here are 10 practical tips to reduce your electricity consumption.
1 – Buy energy efficient appliances
If you want to save electricity, you don’t need to replace all your electrical devices right away. You can just keep in mind that occasionally it would be a good idea to replace your old models with newer models that save energy. Do it gradually. Unless the complete modernization of your interior makes sense. For new purchases, choose the most energy efficient model, although it is usually a little more expensive in terms of purchase price. For example, if you buy an energy-saving refrigerator, you can save hundreds of dollars over its lifetime.
2 – Avoid “sleep” mode
Disabling sleep mode can also work wonders on many devices. Many are in continuous operation – and as a consumer you hardly pay any attention to them. Many devices remain powered on when not in use. All so-called entertainment devices such as hi-fi systems or televisions. You can plug them all into a multiple socket and in the evening when you go to bed switch off the multiple socket. The same goes for your computers, printers, and other desktop monitors. All it takes is the push of a button to save money. Otherwise, even simpler: unplug the devices rather than putting them in “standby” mode. By doing this, it’s a safe bet that you will save at least a hundred euros per year.
3 – equip yourself properly in terms of lighting
If you want to save energy when it comes to lighting in your house or apartment, you should get LED lights. You can also think of automatic shutdowns. It is often recommended in stairwells. The important thing being in the details, to gain in brightness, consider choosing a white or light colored wall. As light-colored walls reflect light better than dark-colored walls, savings are increased by white or light-colored siding. The same goes for light shades.
4 – Regularly defrost your refrigerator and freezer
Regular defrosting also preserves the efficiency of refrigerators and freezers. If the layer of ice in the compartments is thicker than the size of your thumb, they urgently need to be thawed! But be aware that even with thinner layers of ice, energy consumption increases.
5 – do not place your refrigerator next to a heat source
Do not place your electrical appliances near a heat source such as a stove and oven, washing machine and dishwasher, or the heater.
6 – choose your pans well
When cooking, be sure to use the correct baking sheet. Your pan must be adapted to your cooking method. In addition, it must always remain tightly closed with a cover. If you use little water when cooking, you can also save because the water boils faster. High-quality pots and pans can also help reduce your energy consumption.
7 – Switch off your oven before the end of the cooking time
Switch off your oven before the end of your cooking as the residual heat persists for a while and can therefore be used. It also works with preheating. If you turn off the oven about ten minutes before it’s finished and avoid preheating, you can save a lot of money.
8 – Only operate full machines
By not completely filling your washing machine, dryer or dishwasher, you are running half-full machines. So you are wasting energy and money. Therefore, only start your machines when they are full. A lower wash temperature also results in lower energy consumption. If your appliance offers energy saving programs, they should be given priority over so-called “normal” programs.
9 – Choose a fairly low washing temperature
As a rule, modern detergents work very well at low temperatures. No need to run your washing machine at high temperatures frequently. When your laundry is really dirty, this can be justified. Otherwise, just like the pre-wash, it is unnecessary and wastes energy.
10 – Also use the residual heat when ironing
Just like using your oven, when ironing there is a rule similar to baking and baking: use residual heat. Unplug your iron a little before you have finished ironing in order to use the residual heat.