Painting on melamine or laminate: how to do it? What paint?


To successfully restore melamine or laminate furniture, you need to know the properties of these materials and carefully follow certain work steps. There are colors specially designed for these decorative coverings. You also need to have the right equipment.

Why paint over melamine or laminate?

In general, when it comes to getting a good paint job on a piece of furniture or a support, it is because it is aging or damaged. Sometimes it’s because you got bored of its color and want to change it. Is this the case with your TV cabinet or the sideboard in your living room? Whether it’s for financial reasons or just because you don’t want to throw it away and buy a new one instead, there may be times when you want to repaint laminate or melamine. Because the furniture in your living room, like the rest, does not tend to get younger on the contrary! They may seem old-fashioned to you. It is then time to give them a facelift. Thanks to new colors and a little elbow grease, it’s now a snap to give your old furniture a second life. Ideally, repaint your furniture completely to give it a new look. You can of course leave the inside of your in its original state, as this part is not visible anyway. It is entirely up to you. Make sure you choose the right color, as a piece of furniture covered with melamine or laminate cannot be painted more than once.

Important steps for painting over melamine or laminate

  • Preparation of the melamine or laminate support
  • Apply the primer
  • Sanding
  • Painting
  • Drying
  • Removing the masking tape

What material to paint on melamine or laminate?

Like all painting jobs, you need paintbrushes and paint rollers, a color mixer if necessary, sandpaper or emery paper for sanding, and a tarp to protect your job site. For your safety, you need protective gloves, a mask and goggles.

Laminate or laminate: prepare the surface to be painted

Surface preparation

Clean the furniture and remove any grease. Preparation is essential. Old furniture is always covered with a very thin layer of dust, without forgetting the grease residues which often settle on kitchen cupboards or cupboards … These deposits of dirt and grease must be removed before painting. The process is simple: you take a sponge and a degreaser, scrub thoroughly, wipe dry, and let everything dry. You can finalize the cleaning with a clean, dry cloth to remove all the dust. Then protect anything that should not be painted. If you are unable to remove the handles from your furniture, for example, hide them.

Application of the undercoat

It is not absolutely necessary to apply an undercoat. It depends on the color you have chosen for the restoration of your furniture. There are many colors and paints that already incorporate this primer or undercoat, which saves you this step and shortens the process. The application of the primer is done in the same way as the application of the paint, described below.

Sanding the undercoat

If you want to achieve a perfect result, you should absolutely apply two coats of paint and proceed in the same way in both stages of the work. In addition, you must respect the drying time between the two coats specified by the paint manufacturer. Smooth the surface you applied the primer to before you start painting. This way the color will last better. Then remove the dust from the surface to be painted.

Paint melamine or laminate

Paint application

Mix the paint with a paint mixer, then add it to the paint tray. Start with the edges and angles by applying the paint with a round brush.

Continue with a small paint roller and slide in a cross, first vertically, then horizontally, to distribute the paint evenly. Make sure you apply the paint evenly. When applying the second coat, you start over with the same steps.

Drying and removing masking tape

The drying time between the two coats will vary depending on the type of paint used. On average, it takes about 6 hours before you can apply the second coat. Then remove the masking tape and clean any areas that accidentally received paint. When you restore your furniture to make it your own, the options are endless. Whether it is a kitchen or bathroom cabinet or a living room cabinet, you can also redesign the interior of the cabinet with the help of various accessories.

Which paint to paint on melamine or laminate?

To repaint a kitchen cabinet, shelves or even a laminate or melamine table without breaking your head too much, opt for a specialized paint that already includes an undercoat and that is dedicated to this type of material. This type of paint has the particularity of being endowed with a high resistance to impacts and scratches.