Swimming pool water treatment: 6 mistakes not to make

Nobody is perfect. Everybody makes mistakes. You will therefore be able to learn how to avoid maintenance errors in your swimming pool. In addition to annoying, these mistakes cost money. And wouldn’t you prefer to invest it in accessories that make you happy? Or don’t waste too much time just relaxing in the water in your pool. Owning a swimming pool also means dealing with all kinds of errors and problems. The good thing is that every problem has its solution. You just have to know her. If you know the most common mistakes, you are already a master of your swimming pool maintenance and you can spend that time saved in clear, clean and pleasant water instead of sitting in front of your computer and tearing your hair out. by reading long threads on the forums.

Mistake # 1: not cleaning your pool

Cleaning your pool is extremely important. You have to worry about the cleanliness of the water regularly and pass a robot or a pump so that they suck up all the impurities. Anything that collects in the water, dirt or tree leaves, should be removed. Use filtration systems, chemicals and sometimes use elbow grease! A good brush can be very useful, especially in all those hard-to-reach nooks and crannies. At the joints, rub well because material settles there and this attracts bacteria and algae. Brush these areas regularly to keep your pool clean and healthy. This work doesn’t take long and can easily be done while bathing – so is it really work?

Mistake # 2: ignoring your pool’s pH

The pH value measures the water balance. This is very important data in maintaining healthy and stable ecosystems. The same goes for your swimming pool. Low pH means high acidity. Whereas a high pH indicates a basic concentration. The two extremes are not good. The solution for your pool is in the middle. In general a pH equal to 7. Water that is too acidic is free of algae or foreign bodies since they do not feel too comfortable there, even if at first glance it seems pure, clean and flawless, appearances are deceptive. Acidic water with a too low pH can damage your swimming pool and all its equipment: from the heating system to your cover, including the cleaning system. Without preaching for the overuse of chemicals, two solutions exist to recover the balance of your water: one brings your ph back to 7 by lowering its value, the other by increasing. These are solutions that you can find in the form of powder, granules or liquid. You will understand, the goal is to balance the water between 7.0 and 7.4. Adjusting your pool water to this natural balance goes hand in hand with regular water testing. So check the pH value regularly and adjust it accordingly.

Mistake # 3: Adding Chlorine Directly to Water

Chlorine is an important part of swimming pool maintenance. It is also a chemical that must be handled with care, preferably gloves and mask. Do not add it directly to the water in your pond: it may sink, whiten the soil and weaken it. If your soil is damaged too much, it will leak. This is not what you want. So dilute your chlorine in a bucket with water beforehand. Once dissolved, the granules will distribute themselves better and more evenly in your pool. Just fill a bucket with water, then put the chemical in it. Chlorine vapors can occur in hot water. For your health, do not expose yourself directly to these toxic fumes. So put on protections.

Mistake # 4: Running the filter less than eight hours a day

If you don’t turn on your filtration system, your pool has no chance of staying clean. The longer the appliance operates, the less dirt, foreign bodies, leaves and dirt are in the water. Let the pool filter and pump run for at least eight hours a day. The exact duration obviously depends on the type and size of your pool. For most pools, eight hours is a reasonable time for everything to pass through the filter, cleaning it effectively.

Mistake # 5: Running your robot cleaner in the event of algae infestation

When you see algae starting to invade your pool, stop your robot. Unless of course, you want an intensive cultivation of algae or want to transform your swimming pool into a protected area and home to rare species of algae. A robot is magic for cleaning a swimming pool, but the only situation where its use makes the situation worse is algae in the pool. If the pool cleaner encounters algae, it only repels them. Algae are not eliminated, on the contrary, they spread quickly. Instead, vacuum your pool manually and add a product to remove them. Certainly, you will empty a little water, but by sucking the water, you will also eliminate the algae.

Mistake # 6: neglecting to check your pool water every week

Test your pool water at least once a week. Use test strips or a test kit for this. You can also take a sample of your pool water to a local dealer. The latter will be able to carry out a detailed analysis of the water quality. The two levels that you really need to measure every week are chlorine and pH.